We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Magnetic field analysis software.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Magnetic field analysis software - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Magnetic field analysis software Product List

1～21 item / All 21 items

Displayed results
[Case Study] Three-Dimensional Nonlinear Static Magnetic Field Analysis of Steel Plates Using External Coils

[Case Study] Three-Dimensional Nonlinear Static Magnetic Field Analysis of Steel Plates Using External Coils

Calculate the average magnetic flux density flowing inside the iron plate! A case study comparing and verifying the measurements of Team Problem 13.

We conducted a three-dimensional nonlinear static magnetic field analysis by arranging coils in a structure using our "PHOTO-MAG." The analysis focuses on the magnetic flux density flowing inside when a direct current is passed through the coils. The analysis model was created using symmetry, resulting in a 1/2 model. We compared the measured values with the analysis results obtained using our software. Detailed analysis result diagrams can be viewed through the related links. 【Case Overview】 ■ Analysis Subject: Structure composed of iron plates and coils ■ Software Used: PHOTO-MAG ■ Current Value: 1000 [AT] ■ Input Items: Only magnetic characteristics were input *For more details, please download the PDF or feel free to contact us.

  • ３次元非線形2.png
  • ３次元非線形3.png
  • ３次元非線形4.png
  • ３次元非線形5.png
  • ３次元非線形6.png
  • ３次元非線形7.png
  • Other analysis software
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 'Magnet7'

Magnetic Field Analysis Software 'Magnet7'

Magnetic field analysis software widely used in research institutions and companies both domestically and internationally!

"Magnet7" is a magnetic field analysis software that allows for rapid modeling and performance evaluation of electromagnetic devices and electromechanical devices. It adopts a finite element technique based on Maxwell's equations, which is highly accurate and fast, and each module is prepared separately for 2D or 3D design. Additionally, we also handle products specifically designed for optimizing electromagnetic equipment from Infolytica, such as "OptiNet7," and general-purpose finite element thermal conduction analysis software "ThermNet7." 【Features】 ■ User-friendly GUI ■ Automatic mesh generation function ■ 2D, 3D CAD import/export functions ■ Customization function using scripts ■ Demagnetization and magnetization of permanent magnets *For more details, please refer to the catalog or feel free to contact us.

  • Magnetic field analysis/electromagnetic wave analysis
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
General-purpose magnetic field analysis software "Simcenter MAGNET"

General-purpose magnetic field analysis software "Simcenter MAGNET"

Colorful equations of motion! Software specialized in magnetic field analysis compatible with system simulation.

"Simcenter MAGNET" is a general-purpose magnetic field analysis software equipped with features such as 3D winding modeling, circuit coupling capabilities, and electronic trajectory drawing functions. It supports analyses that take into account multi-threading and hysteresis loops, and is widely used in research institutions and companies both domestically and internationally. Additionally, we also offer the software "Simcenter MAGNET Thermal," which analyzes temperature rise and performance degradation due to losses in induction heating and electromagnetic devices. 【Features】 ■ User-friendly GUI ■ 2D, 3D CAD import/export functions ■ Parametric modeling ■ 3D winding modeling capabilities ■ Multi-threading support *For more details, please refer to the PDF document or feel free to contact us.

  • Magnetic field analysis/electromagnetic wave analysis
  • Other analyses
  • Software (middle, driver, security, etc.)
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Analysis Know-How.com】Handling of permanent magnets in μ-EXCEL!

【Analysis Know-How.com】Handling of permanent magnets in μ-EXCEL!

The finite element method automatically calculates the operating point of the magnet (permeability coefficient) based on the defined shape!

To define a permanent magnet in magnetic field analysis, the magnet's BH (demagnetization) curve is required. An image from the manufacturer's catalog is shown below, and we use the BH curve that connects the residual magnetic flux density Br and the coercive force Hc. The catalog also includes the JH curve (magnetization curve) and the maximum energy product BHmax. In the finite element method, the operating point of the magnet (permeance coefficient) is automatically calculated based on the defined shape. For more information on the "definition of permanent magnets," please refer to NO. 119 on "Analysis Know-How.com."

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-BEAM 3D Trajectory Analysis Software】

Magnetic Field Analysis Software 【μ-BEAM 3D Trajectory Analysis Software】

Consider the ion trajectories in electrostatic and magnetostatic fields, dielectrics, electrodes, conductors, coils, magnets, magnetic materials, and space charge!

μ-Beam is a three-dimensional trajectory analysis module for charged particles that takes into account space charge. It can simulate ion beam control. μ-Beam is the trajectory analysis module within the electromagnetic field analysis system μ-MF by Mutech. 【Features】 - Trajectory analysis of charged particles in electric and magnetic fields - Input functions for initial position, initial velocity, and charge current of charged particles - Function to read condition-setting CSV files from Excel - Specification of calculation range and automatic calculation stop function - Trajectory analysis considering classical and relativistic effects - The trajectory calculation method employs Runge-Kutta *For more details, please request documentation or view the PDF data available for download.

  • Electron beam lithography equipment
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
磁場解析ソフト　【μ-TM　誘導加熱の磁場・温度解析ソフト】

磁場解析ソフト　【μ-TM　誘導加熱の磁場・温度解析ソフト】

3次元誘導加熱解析ソフト、コイルの移動なども簡単に設定できます

解析に不慣れな設計・研究の方にも、手軽に操作できるソフトに仕上げています。簡単なコイル設定で、加熱コイルの移動もインターフェースで簡単に設定できます 詳細は【解析ノウハウ.com】の「063　μ-TMの紹介」をご覧ください ポイントはこちら ・誘導加熱・温度解析の専用ソフト ・加熱コイルの有限要素分割は不要 ・複雑なコイル形状やコイルの移動が簡単 ・ウィザード形式で解り易い条件設定 ・３次元誘導加熱解析をもっと身近に さらに ・お客様の問題に踏み込んだ、プロのコンサルティングをご提供 ・受託解析や、カスタム開発も、安価にご提供いたします

  • simulator
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-MRI Magnetic Shielding Room Design Software】

Magnetic Field Analysis Software 【μ-MRI Magnetic Shielding Room Design Software】

The "μ-MRI" magnetic shield room design software allows you to execute calculations from mesh division with just one button! What is actually a complex analysis can be performed by anyone.

Would you like to conduct a simulation to check if the 5GAUSS line leaks from the room by yourself? We have developed software that is easy to operate, even for those who are not familiar with analysis. By setting the room layout and the number of shields, you can simply press the execute button to output the 5GAUSS line diagram. By performing repeated calculations, you can consider the optimal shield placement and the minimum number of shields needed. For more details, please visit "062 μ-MRI Introduction" on [Analysis Know-How.com]. Here are the key points: - Dedicated software for MRI shield rooms - Specification of room layout and the number of shields for walls and floors - One-button operation for mesh division and calculation execution - Directly displays the 5GAUSS line - Complex analysis made accessible to anyone Additionally: - We offer professional consulting that addresses your specific issues - We also provide contracted analysis and custom development at a low cost.

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-EXCEL Magnetization Torque Version】

Magnetic Field Analysis Software 【μ-EXCEL Magnetization Torque Version】

[Excel-based simulation software] Check out the operation feel in the video now! A free trial version is also available! Limited-time campaign too!

"μ-Excel" is a low-cost thermal, structural, and electromagnetic analysis software that overturns the common belief that analysis software is expensive. It operates on Excel, allowing for professional simulations with a familiar user experience. You can check the operation experience through videos for each work step! The video available here is "Step 10 Surface Magnetic Flux Calculation" - taking the "Magnetization Torque Version" of the "μ-Excel" series as an example, we will introduce the flow of surface magnetic flux evaluation created by the magnetized magnets unique to the magnetization torque version. ▽▼▽ Please also check out other videos! ▼▽▼ Step 0 Introduction Step 1 Starting Excel Step 2 Model Creation Step 3 DXF Import Step 4 Mesh Creation Step 5 Execute Calculation Step 6 Add Materials Step 7 Display Results Step 8 Create Graphs Step 9 Save As ▼Step 10 Surface Magnetic Flux Calculation Step 11 Torque Calculation

  • Magnetic field analysis/electromagnetic wave analysis
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-EXCEL Synchronous Motor Characteristics Version】

Magnetic Field Analysis Software 【μ-EXCEL Synchronous Motor Characteristics Version】

An easy-to-use, low-cost analysis software based on Excel. A subscription is also available for 9,800 yen per month (excluding tax).

The "μ-Excel Motor Characteristics Edition" is an easy-to-use motor design tool that can output the motor's static characteristics, including torque-speed and current curves, as well as torque-output and efficiency curves. You can easily create motor models using model templates. It calculates the torque constant from finite element method results and outputs characteristic curves. We also offer a subscription service available for 9,800 yen per month (excluding tax). We encourage you to consider implementing it! 【Do you have any of these concerns in motor design?】 - It seems difficult to master the software - Creating motor models is cumbersome - I think finite element method calculations are necessary - The cost of software implementation is a high barrier - I would like consulting services as well 【With μ-Excel Motor Characteristics Edition!】 ■ You can perform calculations using familiar Excel operations ■ You can easily create motor models with model templates ■ It accurately calculates magnetic field distribution through finite element method magnetic field analysis ■ You can use the subscription service for 9,800 yen per month (excluding tax) ■ We will back you up in collaboration with motor design professionals.

  • simulator
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
磁場解析ソフト　【μ-EXCEL　誘導加熱版】

磁場解析ソフト　【μ-EXCEL　誘導加熱版】

材料特性は磁場解析と温度解析用が必要！高周波コイルは加熱ON/余熱OFFが設定できます！

ＩＨクッキングは誘導加熱原理を使っています。高周波コイルで発生した磁場をお鍋の底に当てると渦電流が発生します、ここまでが磁場解析。渦電流は発熱を起こしお鍋の底からお水へ熱が伝わり温度が上昇します、ここは熱解析。誘導加熱は狙った場所を短時間で加熱できるので、様々なところに利用されています 詳細は【解析ノウハウ.com】の「NO.019 ex誘導加熱版の紹介 」をご覧ください ポイントはこちら ・誘導加熱によりワークの温度変化を見ます ・渦電流は磁場解析で求めるのでモデルに空間が必要 ・渦電流はワーク表面を薄く流れるので、メッシュを細かく ・材料特性は磁場解析と温度解析用が必要 ・高周波コイルは加熱ON/余熱OFFが設定できる

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
磁場解析ソフト　【μ-MF　3次元電磁界解析ソフト】

磁場解析ソフト　【μ-MF　3次元電磁界解析ソフト】

μ-EXCELで基本特性を確認したら、より精密な３次元解析へ！3次元電磁界解析ソフト 解析をウィザード（解析案内）が誘導！

静電磁界・渦電流からヒステリシス解析まで、3次元電磁界解析をウィザード（解析案内）が誘導します 詳細は【解析ノウハウ.com】の「NO.115　3次元電磁界解析μ-MFの紹介」をご覧ください　=>https://mu-excel.com/other115.html ポイントはこちら ・μ-MFは3次元電磁界解析ソフト ・静電磁界・渦電流からヒステリシス解析まで ・解析テーマごとのウィザード（解析案内）が誘導します ・NASTRANメッシュをインポートし結果表示は標準装備 ・買取90万円から（レンタル：年間45万円、月額4万5千円から） ・メッシュ作成ソフトは別途必要、Femap,Jupiter,Aircubeがお勧め さらに ・お客様の問題に踏み込んだ、プロのコンサルティングをご提供 ・受託解析や、カスタム開発も、安価にご提供いたします

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-E&S Vector Magnetic Characteristic Analysis / Technical Documentation】

Magnetic Field Analysis Software 【μ-E&S Vector Magnetic Characteristic Analysis / Technical Documentation】

Publication of an explanation of vector magnetic characteristic analysis technology for the realization of high-efficiency motors!

This document explains the vector magnetic characteristic analysis technology for achieving high-efficiency motors. This technology is supported by Professor Masato Enokizono (Emeritus Professor at Oita University, currently the representative of the Vector Magnetic Characteristic Technology Research Institute), and we have cited information from the Vector Magnetic Characteristic Technology Research Institute, which he leads. [Contents] 1. The target is the reduction of iron loss in electromagnetic steel sheets. 2. Iron loss is the sum of eddy current loss and hysteresis loss. 3. Vector magnetic characteristics of electromagnetic steel sheets. 4. Conventional measurements are scalar magnetic measurements. 5. Developed vector magnetic measurements. 6. Actual measurement results. 7. Database creation as magnetic characteristics. *For more details, please refer to the PDF document or feel free to contact us.

  • PM motor
  • Steel
  • Magnetic field analysis/electromagnetic wave analysis
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-E&S Vector Magnetic Property Analysis / Development Case Studies】

Magnetic Field Analysis Software 【μ-E&S Vector Magnetic Property Analysis / Development Case Studies】

A small high-power motor developed by Professor Masato Enokizono of the Vector Magnetic Characteristics Research Institute, capable of continuous operation at 10,000 RPM with a diameter of approximately 10 cm and air cooling.

Introduction of the article published in the Nikkan Kogyo Shimbun on March 22. Our company's "Vector Magnetic Property Analysis" technology was developed under the leadership of Professor Masato Enokizono (Specially Appointed Professor at Nippon Bunri University, Emeritus Professor at Oita University, and Visiting Professor at RWTH Aachen University, Germany). *The article can be found at the following links: 1) Vector Magnetic Property Technology Research Institute http://www.vector-magtec.jp/index.html 2) Mutec HP news https://www.mutec.org/ - Induction motors are used in various industries; they are simple, robust, resistant to harsh environments, low-cost, and maintenance-free. - For high output, larger sizes are needed, and high-speed rotation in smaller sizes can achieve high output, but heat generation in the iron core is a challenge. - Currently, electromagnetic steel sheets are about 300μm thick; reducing thickness helps suppress heat generation, and we have invented practical 80μm steel sheets. - Thin steel sheets are difficult to laminate, so we will mass-produce them using a winding lamination method. A dual-type rotor that sandwiches the rotor from both sides will further increase torque. - EV synchronous motors generate a lot of heat in the coils, and magnets are sensitive to heat, requiring water cooling systems. The developed induction motor uses air cooling, and low output can be integrated into four wheels. - A new choice technique that overturns the common belief that "induction motors are impossible!" The challenges of increasing speed involve coil winding, processing ultra-thin electromagnetic steel sheets, and low friction for the rotating shaft. We aim for practical application through joint research with specialized technology manufacturers.

  • simulator
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-E&S Vector Magnetic Characteristic Analysis / Iron Loss Distribution】

Magnetic Field Analysis Software 【μ-E&S Vector Magnetic Characteristic Analysis / Iron Loss Distribution】

Aiming for low loss, accurately measure the actual state of electromagnetic materials and understand and analyze their vector magnetic characteristics!

Iron loss evaluation, which is a bottleneck in motor analysis. Conventional methods only consider iron loss as a function of magnetic flux density, resulting in low accuracy. However, "Vector Magnetic Characteristic Analysis" accurately determines the magnetic field and magnetic flux density to calculate iron loss. It can compute high-precision distributions of magnetic field, magnetic flux density, and iron loss that other software cannot achieve. Vector magnetic characteristics refer to the properties that consider the relationship between the magnetic field H and magnetic flux density B of electromagnetic steel materials, taking into account their direction (vector). The finite element method electromagnetic field simulator that considers these characteristics is "μ-E&S." [Features] - High-precision calculation of magnetic field vectors is possible by considering vector magnetic characteristics. - Rotating magnetic fields and hysteresis can be calculated. - It is designed as an easy-to-use tool specifically for iron loss evaluation. *For more details, please request materials or view the PDF data available for download.

  • Magnetic field analysis/electromagnetic wave analysis
  • simulator
  • Image analysis software
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-EXCEL Orbital Analysis Version】

Magnetic Field Analysis Software 【μ-EXCEL Orbital Analysis Version】

Consider the ion trajectories in electrostatic and magnetic fields, dielectrics, electrodes, conductors, coils, magnets, magnetic materials, and space charge!

μ-Excel is analysis software that uses a two-dimensional (or axisymmetric) finite element method. The μ-Excel series consists of individual packages for each analysis theme, allowing for smooth analysis through customized input and output screens for each theme. Additionally, it utilizes Excel macros in the GUI, enabling operation in a familiar Excel environment without discomfort. It is evolving into a rich variety of themes, not only for electromagnetic field analysis but also for heat, structure, fluid, and electromagnetic waves. Please look for the series that matches your theme (currently, there are a total of 11 series). 【Features】 - Analysis of electric fields and magnetic fields, and behavior analysis of ion beams in electric and magnetic fields - Start trajectory calculations with mass, charge number, initial coordinates, and initial velocity of charged particles - Calculation of electric field, potential distribution, magnetic field, magnetic field lines, and trajectory diagrams - Repulsive forces applied to multiple charged particles *It can be introduced at a lower cost compared to other analysis software. The academic version is even more advantageous! *For details, please contact us or download the PDF.

  • simulator
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-EXCEL Eddy Current Version】

Magnetic Field Analysis Software 【μ-EXCEL Eddy Current Version】

Input the frequency of the excitation coil, the permeability and conductivity of the material! It can be defined as multiple conductors.

We calculate the magnetic field shielding effect due to eddy currents, as well as the distribution of eddy currents, heat generation distribution, and the amount of heat generated. When defined as multiple conductors, the eddy currents in each conductor can be calculated in a closed state. For details, please refer to "NO.049 ex Eddy Current Number Introduction" on 【Analysis Know-How.com】. Here are the key points: - Input the frequency of the excitation coil, the permeability, and the conductivity of the material. - Eddy currents are closed within the conductors. - It can be defined as multiple conductors. - As a result, eddy currents flow in each conductor, reducing losses. - Displays the magnetic field, eddy current, and heat generation distribution. - Outputs the total amount of heat generated (loss amount).

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-EXCEL Static Magnetic Field Version】

Magnetic Field Analysis Software 【μ-EXCEL Static Magnetic Field Version】

The key is the magnitude of the X component at the position where the Y component crosses zero! It can be done in about 10 minutes from modeling to result display. You can calculate it with the trial version.

The magnetic field distribution analysis of magnetron sputtering was conducted using an axisymmetric model. From the distribution of the magnetic flux density components on the target, we estimate the erosion. The magnitude of the X component at the position where the Y component crosses zero is crucial. This process can be completed in about 10 minutes, from modeling to result display. Furthermore, it can be done with the free trial version of the static magnetic field! Please give it a try. For more details, please refer to NO.020 on "Analysis Know-How.com." You can download the trial version from the sample software on the special site below: https://premium.ipros.jp/mutec/product/detail/2000623620/?hub=148+2991245

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
磁場解析ソフト　【μ-EXCEL　電磁力版】

磁場解析ソフト　【μ-EXCEL　電磁力版】

冷蔵庫にペタペタのマグネットホルダ！電磁石や磁石の吸着力を応用した多くの製品があります！

鉄にコイルが巻かれた電磁石や永久磁石は鉄につい付きます。これを利用した様々な製品が利用されています。代表的なものをex電磁力版で解析してみます 詳細は【解析ノウハウ.com】の「NO.102吸着力・トルク利用製品の解析あれこれ」をご覧ください ポイントはこちら ・電磁石や磁石の吸着力を応用した多くの製品がある ・ソレノイドはコイルon/offで弁の開閉 ・リレーは回路のスイッチ ・磁石とコイルによる時計モータ ・冷蔵庫にペタペタのマグネットホルダ ・２次元解析では厚みで換算 ・トルクは支点位置を指定

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-EXCEL Analysis Know-How Video Site】

Magnetic Field Analysis Software 【μ-EXCEL Analysis Know-How Video Site】

The video contains compact content of about 1 to 2 minutes! You can easily check the topics you want to know using your smartphone or other devices.

"Analysis Know-How.com" is a website that collects videos introducing the benefits of the analysis software μ-EXCEL, provided by Mutech, which is easy, fast, and designed for initial assessments. The videos are compact, lasting about 1 to 2 minutes, and allow for filtered searches by keywords and categories. You can easily check the items you want to know using your smartphone during your spare time. In the "Home" menu, you can find a list of know-how collections. By clicking the "View Details" button, you can access the key points and videos of the know-how. In the "Category" menu, you can narrow down by genre or series. With "Keyword Search," you can further refine related videos. In the "Blog," we will introduce updated and additional videos as they become available. μ-EXCEL is available as a subscription service for 9,800 yen per month (excluding tax). Additionally, Mutech offers: - Professional consulting that delves into your issues. - Affordable contract analysis and custom development services. Please feel free to contact us for more details.

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-EXCEL Subscription Service】

Magnetic Field Analysis Software 【μ-EXCEL Subscription Service】

Techniques and know-how in short video format! You can search during your spare time for efficient work!

μ-EXCEL is a thermal analysis software designed for easy and quick initial assessments. It was created with the concept of simplifying operations and delivering fast results to first evaluate the effectiveness of ideas. Additionally, it is offered through a subscription service that lowers the barrier to entry. For a monthly fee of 9,800 yen, users can access unlimited usage, with options for monthly subscriptions that can be activated only when needed, and the ability to resume at any time. As part of a comprehensive support system, "Analysis Know-How.com" was established. It compiles the overview and techniques of analysis work into short videos, allowing for efficient work by searching during spare moments on a smartphone. If you encounter difficulties, please send your Excel file as an email attachment, and an experienced supporter will review it and provide feedback. For information on "subscription services and support," please refer to No. 024 on "Analysis Know-How.com." Furthermore: - We offer professional consulting that delves into your issues. - We also provide contracted analysis and custom development at affordable prices.

  • Other analyses
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnetic Field Analysis Software 【μ-EXCEL Free Demo Version・Free Trial Version】

Magnetic Field Analysis Software 【μ-EXCEL Free Demo Version・Free Trial Version】

Download now! 【Excel-based simulation software】~ Easy to use even for on-site personnel ~

"μ-Excel" is a low-cost thermal, structural, and electromagnetic analysis software that overturns the common belief that analysis software is expensive. It operates on Excel, allowing for professional simulations with a familiar user experience. 【Do you have any of these concerns?】 - You don't need the advanced features of expensive analysis software... - You want analysis results right away... - You're worried about learning how to operate the analysis software... For those individuals, we recommend our subscription service! 　■ Unlimited use for just 9,800 yen for one month 　■ You can choose from multiple themes, such as magnetic field analysis and temperature analysis 　■ Free trial version available for web download 　■ Operates in Excel, enabling professional simulations with a familiar user experience 　■ Analysis and development as well 　　▽ Download now from the "Sample Software" at the bottom of the page! ▽ 　　▽ You can also watch a video of the user experience by searching for "Analysis Know-How.com"! ▽ *Analysis is possible in various scenarios. Induction heating version (trial version available) / Static magnetic field version (trial version available) / Electrostatic field version (trial version available) / Heat conduction version (trial version available) / Electromagnetic force version / Magnetization torque version / Stress version / Induction machine version / Mold cooling version / Dielectric stress version / Ion beam version

  • simulator
  • Magnetic field analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Magnetic field analysis software

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.